| Author |
FreeAXP Crashes |
raperswil
Member
Posts: 11
Joined: 19.11.09 |
| Posted on December 09 2010 16:20 |
|
|
Dear All
Here is my setup.
Mac OSX 10.6.x --> Parallels 5 --> Windows 2003 Sp2 32-bit --> FreeAXP --> VMS
While Installing VMS FreeAXP crashes. This occurs when the boot image is being read 10...20... 7[img][/img]0
Here is the log file:
FreeAXP Virtual Alpha x86 version 1.1.0.307 (Sep 6 2010 13:39:39)
File opened at 2010-12-10 07:23:16
%XNV-I-RESTST: NVRAM restored from C:\Documents and Settings\All Users\Documents\alpha.nvr
DFL-I-MOUNT: cp(control).alpha(alpha).pcibus(dc21071da).pci6(symbios).disk0.0(file): Mounted file C:\Documents and Settings\All Users\Documents\alpha_dka0.img, 1189512 512-byte blocks, 5507/12/18.
DFL-I-MOUNT: cp(control).alpha(alpha).pcibus(dc21071da).pci6(symbios).disk0.6(file): Mounted file Y:\DATA\UNCLASSIFIED\Miro\OpenVMS_8.3_Alpha.iso, 1081784 512-byte blocks, 2588/11/38.
XTI-I-RESTST: cp(control).alpha(alpha).pcibus(dc21071da).toy(bq3287): TOY restored from C:\Documents and Settings\All Users\Documents\alpha.toy
Actor framework started with 3 thread(s)
CTS-I-NEWSESS: New session on cp(control).alpha(alpha).pcibus(dc21071da).serial0(i16550) from IP address 127.0.0.1
AC4-I-DECOMP: Decompressing ROM image.
0%....10%....20%....30%....40%....50%....60%....70%....80%....90%....100%
AC4-I-PATCHROM: Patching ROM for speed.
AXP-I-CPUSTRT: cp(control).alpha(alpha).cpu0(EV4): CPU Starting
IP4-W-SCGTFAIL: Scatter-gather failure:
Address: 00000000
WSM: 0ff00000
TBA: 0000000001400000
Mk'd WSM: 0ff00000
PTE @ 0000000001400000
PTE: 0000000000000000
Alternative calculation:
Offset: 00000000
PPN: 00000000
Cmp mask: f0000000
Compare: 00000000
Kp mask: 0fffffff
Keep: 00000000
TBA: 0000000001400000
Kp Mask: 00000001fffc0000
Keep: 0000000001400000
PPN-part: 0000000000000000
PTE @ 0000000001400000
@ 0000000001400000 : 0000000000000000
@ 0000000001400008 : 0000000000000000
@ 0000000001400010 : 0000000000000000
ESL-F-FAIL: Emulator Failure:
Exception: ESL-F-UKN: Unknown error in 'int' handler for actor 'class CIntel21143Actor'.
Is VMS having problems with the Intel 21143 Network card?
I use the 13" Mac Book pro released in Jan 2010.
thank you |
|
|
| Author |
RE: FreeAXP Crashes |
iamcamiel
Moderator
Posts: 25
Location: Wageningen, The Netherlands
Joined: 06.04.08 |
| Posted on December 11 2010 04:48 |
|
|
Hello,
What version of VMS is this? |
 |
| Author |
RE: FreeAXP Crashes |
raperswil
Member
Posts: 11
Joined: 19.11.09 |
| Posted on December 11 2010 05:47 |
|
|
OpenVMS 8.3. Sorry for not making it clear the first time.
I also installed VMS 8.3 using personalAlpha. So now I am able to boot and log into the VMS system.
THanks for any help.
Edited by raperswil on December 11 2010 16:14 |
|
|
| Author |
RE: FreeAXP Crashes |
Bruce Claremont
Moderator
Posts: 623
Joined: 07.01.10 |
| Posted on December 16 2010 05:59 |
|
|
|
We have tried to recreate the problem without success. Everything looks to install and work perfectly installing OpenVMS 8.3 from an ISO using FreeAXP 307 on Parallels with Windows 2003 x32 SP2. The only difference we see is that raperswil has a newer Mac. |
|
|
| Author |
RE: Repeated crashes with 1.1.0.307 |
malmberg
Moderator
Posts: 530
Joined: 15.04.08 |
| Posted on January 05 2011 01:57 |
|
|
I am having several crashes. The hard drive of my previous Mac Book failed and I was issued a new system as a replacement. This new Mac Book is a quad processor.
This is on Windows 7 Ultimate, 64 bit, running under Vritual box 3.2.12 r68302
with 2 vrtual NICs dedicated to FreeAXP.
To be more precise, the Windows VM is:
Intel(R) Core(TM) i5 CPU M 250 @ 2.40 GHz 2.29 GHz
Memory = 1.00 GB.
Mac Book host:
2.4 GHz Intel Core i5
Memory 4 GB 1067 Mhz DDR3
Mac OS X 10.6.5.
The emulated NiCs are using the Red Hat virtual adapters recommended by Virtual Box.
It appears that just booting the VMS 8.3 instalation from the CDROM connected, and then leaving it idle for a little while is enough to trigger the crash.
Uptime has ranged from a few minutes to overnight. It appears that activiity on the putty console session keeps the crashes from occuring.
If I boot either the installed image or the CD-ROM and then do not type in anything at the console, I will typically see a crash with in a 2 hour window.
I did not see emulator crashes when running the earlier version of FreeAXP that I had set up on similar Windows VMs running under VMware or VirtualBOX.
-- Log File ---
FreeAXP Virtual Alpha x64 version 1.1.0.307 (Sep 6 2010 13:38:10)
File opened at 2011-01-04 18:20:40
%XNV-w-NOREST: NVRAM could not be restored from C:\Users\Public\Documents\Frog.nvr
DFL-I-MOUNT: cp(control).alpha(alpha).pcibus(dc21071da).pci6(symbios).disk0.0(file): Mounted file E:\Frog_dka0.img, 20971520 512-byte blocks, 32768/16/40.
DFL-I-MOUNT: cp(control).alpha(alpha).pcibus(dc21071da).pci6(symbios).disk0.1(file): Mounted file F:\Frog_dka100.img, 20971520 512-byte blocks, 32768/16/40.
XTI-W-NOREST: cp(control).alpha(alpha).pcibus(dc21071da).toy(bq3287): TOY could not be restored from C:\Users\Public\Documents\Frog.toy
Actor framework started with 5 thread(s)
AC4-I-DECOMP: Decompressing ROM image.
0%....10%....20%....30%....40%....50%....60%....70%....80%....90%....100%
AC4-I-PATCHROM: Patching ROM for speed.
AXP-I-CPUSTRT: cp(control).alpha(alpha).cpu0(EV4): CPU Starting
CTS-I-NEWSESS: New session on cp(control).alpha(alpha).pcibus(dc21071da).serial0(i16550) from IP address 127.0.0.1
IP4-W-SCGTFAIL: Scatter-gather failure:
Address: 00000000
WSM: 0ff00000
TBA: 00000000024c0000
Mk'd WSM: 0ff00000
PTE @ 00000000024c0000
PTE: 0000000000000000
Alternative calculation:
Offset: 00000000
PPN: 00000000
Cmp mask: f0000000
Compare: 00000000
Kp mask: 0fffffff
Keep: 00000000
TBA: 00000000024c0000
Kp Mask: 00000001fffc0000
Keep: 00000000024c0000
PPN-part: 0000000000000000
PTE @ 00000000024c0000
@ 00000000024c0000 : 0000000000000000
@ 00000000024c0008 : 0000000000000000
@ 00000000024c0010 : 0000000000000000
ESL-F-FAIL: Emulator Failure:
Exception: ESL-F-UKN: Unknown error in 'int' handler for actor 'class CIntel21143Actor'. |
|
|
| Author |
RE: FreeAXP Crashes |
malmberg
Moderator
Posts: 530
Joined: 15.04.08 |
| Posted on January 06 2011 15:01 |
|
|
|
I downgraded to "x64 version 1.0 patch 9 build 304" yesterday and I have not seen a crash since. |
|
|
