Posts: 1 Location: Minneapolis, MN, USA Joined: 23.02.06
Posted on February 23 2006 17:36
I am looking for the ECU disk necessary to setup EISA boards within an Alphaserver 1000A (4/233). I found the location it use to be stored at in the HP/Compaq FTP download server but, due to royalties, they don't offer the software anymore.
I also found that the HP/Compaq part number is QC-01YAA-HC.
Posts: 16 Location: Stonehouse, Gloucestershire, England Joined: 13.03.06
Posted on March 15 2006 10:19
i inherited my alphaserver 100a 5/300
the only 2 diskettes i have are
ECU Diskette v1.9 DEC Alpha for use in configuration of systems to be used with Windows NT.
ECU Diskette v1.9 DEC Alpha for use in configuration of systems to be used with OpenVMS and Digital UNIX.
whats more amusing is i'm actually after a DCU disk that enables me to play around with the DAC960 raid card that was in the machine that i inherited, but the disk got thrown away 2 weeks after i got the machine.
those disks may be of interest. but i have no idea if i can copy them.
Posts: 19 Location: Nottingham UK Joined: 13.12.05
Posted on March 17 2006 23:47
I also have a DAC960 running in my Alphaserver.
It was a while ago but I downloaded the firmware and configuration utilities I think from the hp/Compaq site. I followed the instructions
and created a floppy that can be used from the ARC console to configure SWXCR for the DAC960.
I'll have a look to see if I can find a link for you, otherwise I have the disk and there must be an easy way of getting a copy to you.
malmberg December 12 2017 HPE only makes the most current version of OpenVMS Alpha / IA64 /VAX available to hobbyists. When I had access to the Alliance 1 program it was the same. No public downloads are allowed by HPE.
nmbonao December 08 2017 Is anybody knows OpenVMS 8.2 version downloadable version? or CD copy? Thank you very much
aarommes December 02 2017 Bitcoin and Blockchain enthusiasts ( plus distributed computing ) please connec / reply: http://www.openvmshobbyis t.com/forum/viewthread.ph p?forum_id=130&thread_id= 2991
malmberg September 10 2017 https://sourceforge.net/p /vms-ports/wiki/VMSInstal lation/ For the most part just use VMS 6.1 media instead of 7.3. But why run the older release?
DoeveR August 07 2017 Where can I find the write up on running VMS 6.1 using the simh emulator?
Bart March 20 2017 Happy to have found my password again!