I did setup a DNS server (based on my simple knowledge), and following some hp manuals. I must review them all...
I got the XDM log, and no login Xwindow. Could anyone explain what is this message. I see no errors. But nothing happens...
TIA
$ type *.log;2
SYS$SPECIFIC:[TCPIP$XDM]TCPIP$XDM_RUN.LOG;2
$ Set NoOn
$ VERIFY = F$VERIFY(F$TRNLNM("SYLOGIN_VERIFY")
10-JAN-2009 23:49:17.46 - Waiting for DECwindows to start...
10-JAN-2009 23:49:22.49 - Waiting for DECwindows to start...
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004
Hi, Hoff.
It is a very simple, small, home network, nothing more. I´m trying set it up to get graphics, since I´ve tried DW and I saw something in XDM log file meaning to convert IP to host name. I realized that XDM needs that. So I´m typing, reading, searching for info on set DNS server up...afterall, it seems to be ok (or not ), but I didnt understand the message I got. It told me not too much...
I got here through DNS howto from linux as a sample. It worked once, under slackware when I needed, and that was not so complicated. Maybe some misconfiguration, maybe some missing info/file...
But I´ll keep going...
Thanks, I´ll take a review on my work.
Huh....
Even I didnt undertand very clear what you are telling me...I´ll check this out...
I found some info about one specific error I got. Fixed, but not a quite success.
Ok, Hoff.
I must thank you.
I know it is a bit heavy posting pieces from screen messages, but, I´d like to show how is my (mis)configuration...and...yes, I´ll take a time to review all this stuff you told me (I´m already on that).
Step by step, things will be in right place... below some excerpt from my box. I´ve marked some lines with "<---??" as you can see. Cheers.
*****************
bind.log
$ type tcpip$bind_run.log
$ Set NoOn
$ VERIFY = F$VERIFY(F$TRNLNM("SYLOGIN_VERIFY"))
Tue 13 01:13:08 NOTICE: starting. Digital TCP/IP Services for OpenVMS - BIND 8.
1.2 V5.1-15
Tue 13 01:13:09 INFORMATIONAL: slave zone "mydom.nom" (IN) loaded (serial 23)
Tue 13 01:13:10 INFORMATIONAL: slave zone "1.168.192.in-addr.arpa" (IN) loaded (
serial 1)
Tue 13 01:13:10 INFORMATIONAL: master zone "localhost" (IN) loaded (serial 42)
Tue 13 01:13:10 INFORMATIONAL: master zone "0.0.127.in-addr.arpa" (IN) loaded (s
erial 42)
Tue 13 01:13:10 INFORMATIONAL: cache zone "" (IN) loaded (serial 0)
Tue 13 01:13:11 INFORMATIONAL: listening on [127.0.0.1].53 (LO0)
Tue 13 01:13:11 INFORMATIONAL: listening on [192.168.254.200].53 (QE0)
Tue 13 01:13:11 INFORMATIONAL: listening on [192.168.1.200].53 (QE1)
Tue 13 01:13:11 INFORMATIONAL: listening on [0.0.0.0].53 (wildcard)
Tue 13 01:13:11 INFORMATIONAL: forwarding source address is [0.0.0.0].0
Tue 13 01:13:11 NOTICE: Ready to answer queries.
Tue 13 01:18:27 NOTICE: secondary zone "1.168.192.in-addr.arpa" expired <-- ???
Tue 13 01:18:27 INFORMATIONAL: Err/TO getting serial# for "1.168.192.in-addr.arp
a"
Tue 13 01:18:27 NOTICE: attempted to fetch zone 1.168.192.in-addr.arpa from self
(192.168.1.200)
Tue 13 01:22:04 NOTICE: secondary zone "mydom.nom" expired <--??
Tue 13 01:22:04 INFORMATIONAL: Err/TO getting serial# for "mydom.nom"
Tue 13 01:22:04 NOTICE: attempted to fetch zone mydom.nom from self (192.168.1.2
00)
xdm.log
$ type tcpip$xdm_run.log
$ Set NoOn
$ VERIFY = F$VERIFY(F$TRNLNM("SYLOGIN_VERIFY"))
13-JAN-2009 00:13:21.44 - Waiting for DECwindows to start...
13-JAN-2009 00:13:26.50 - Waiting for DECwindows to start...
13-JAN-2009 00:13:31.55 - Waiting for DECwindows to start... <---waiting,so after this line, it´s ok?
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004
%SYSTEM-S-NORMAL, normal successful completion
%NONAME-F-NOMSG, Message number 00000004 <---- I dont know what means...
local database
TCPIP> sh host
LOCAL database
Host address Host name
192.168.1.100 CLEIDIR <---virtual ether tap on WXP
127.0.0.1 LOCALHOST, localhost
192.168.1.200 marx.mydom.nom, MARX.MYDOM.NOM, marx <---virtual ether tap inside vax
192.168.254.200 mcleide2728.mydom.nom, MCLEIDE2728, mcleide2728 <---real ether inside vax
200.204.0.10 resolver1.telesp.net.br <---def my provider
192.168.254.100 www, WWW <---real ether inside WXP (??)
%TCPIP-E-BIND_NOSERVERS, default servers are not available <---???
%TCPIP-W-NORECORD, information not found<---???
-TCPIP-E-BIND_NOSERVERS, default servers are not available<---???
cygwin screen...
this line took my attention
XDM: too many retransmissions, declaring session dead <--- I couldnt realize where to fix this
*****************
Tue 13 01:13:09 INFORMATIONAL: slave zone "mydom.nom" (IN) loaded (serial 23)
Tue 13 01:13:10 INFORMATIONAL: slave zone "1.168.192.in-addr.arpa" (IN) loaded (
serial 1)
So you configured mydom.nom and 1.168.192.in-addr.arpa as slave zones, i.e. there's supposed to be a master server that these zones can be copied from from time to time. But: you didn't configure a master server, so when it's time to copy...
Tue 13 01:18:27 NOTICE: secondary zone "1.168.192.in-addr.arpa" expired <-- ???
Tue 13 01:18:27 INFORMATIONAL: Err/TO getting serial# for "1.168.192.in-addr.arp
a"
Tue 13 01:18:27 NOTICE: attempted to fetch zone 1.168.192.in-addr.arpa from self
(192.168.1.200)
Tue 13 01:22:04 NOTICE: secondary zone "mydom.nom" expired <--??
Tue 13 01:22:04 INFORMATIONAL: Err/TO getting serial# for "mydom.nom"
Tue 13 01:22:04 NOTICE: attempted to fetch zone mydom.nom from self (192.168.1.2
00)
And another thing:
Tue 13 01:13:11 INFORMATIONAL: forwarding source address is [0.0.0.0].0
You got to tell your BIND server what to do if it has to resolve a host name that it doesn't know about. This is called "forwarding": the BIND server is given the IP address of another BIND server it can ask - it forwards the request to another system.
My suggestion would be to forget about BIND (i.e. go into TCPIP$CONFIG and disable BIND). Next, go into "1 - Core" and "4 - BIND Resolver" and enter your ISP's BIND server.
%TCPIP-E-BIND_NOSERVERS, default servers are not available <---???
%TCPIP-W-NORECORD, information not found<---???
-TCPIP-E-BIND_NOSERVERS, default servers are not available<---???
This stems from the fact that TCPIP SHOW HOST doesn't only list the local hosts information, but also tries to contact the BIND server for information. If you only want to see local hosts info, use TCPIP SHOW HOST /LOCAL.
malmberg August 04 2022 No more VAX hobbyist licenses. Community licenses for Alpha/IA64/X86_64 VMS Software Inc. Commercial VMS software licenses for VAX available from HPE.
ozboomer July 20 2022 Just re-visiting.. No more hobbyist licenses? Is that from vmssoftware.com, no 'community' licenses?
valdirfranco July 01 2022 No more hobbyist license...sad
mister_wavey February 12 2022 I recall that the disks failed on the public access VMS systems that included Fafner
parwezw January 03 2022 Anyone know what happened to FAFNER.DYNDS.ORG? I had a hobbyist account here but can longer access the site.
gtackett October 27 2021 Make that DECdfs _2.1A_ for Vax
gtackett October 27 2021 I'm looking for DECdfs V2.4A kit for VAX. Asking here just in case anyone is still listening.
MarkRLV September 17 2021 At one time, didn't this web site have a job board? I would love to use my legacy skills one last time in my career.
malmberg January 18 2021 New Hobbyist PAKs for VAX/VMS are no longer available according to reports. Only commercial licenses are reported to be for sale from HPE
dfilip January 16 2021 Can someone please point me to hobbyist license pak? I'm looking for VAX/VMS 7.1, DECnet Phase IV, and UCX/TCPIP ... have the 7.1 media, need the license paks ... thanks!
)
