Posts: 87 Location: The Netherlands Joined: 28.03.10
Posted on November 28 2011 22:56
If you're looking for something, I have a lot of rx2600 spares that I probably won't be needing anymore. I even have an entire rx2600 System Board (motherboard; which I've tested and works, you would probably get
UUID errors at most in the EFI environment, but you can still manually boot up operating systems), processor-cooler and VRM assemblies, Intel Itanium 2 "Madison" at 1500 MHz with 6 MB cache (SL6XF), slimline DVD-ROM drive, airflow guides/baffles, iLO/MP card, 2 & 4 GB PC2100 ECC-registered DDR-SDRAM memory kits and more.
If there's something you're looking for, let me know and I'll see if I have it. I also have a bunch of PCI/-X cards, like gigabit ethernet adapters, SCSI controllers and so on. Most of which, 100% OpenVMS-compatible.
malmberg December 12 2017 HPE only makes the most current version of OpenVMS Alpha / IA64 /VAX available to hobbyists. When I had access to the Alliance 1 program it was the same. No public downloads are allowed by HPE.
nmbonao December 08 2017 Is anybody knows OpenVMS 8.2 version downloadable version? or CD copy? Thank you very much
aarommes December 02 2017 Bitcoin and Blockchain enthusiasts ( plus distributed computing ) please connec / reply: http://www.openvmshobbyis t.com/forum/viewthread.ph p?forum_id=130&thread_id= 2991
malmberg September 10 2017 https://sourceforge.net/p /vms-ports/wiki/VMSInstal lation/ For the most part just use VMS 6.1 media instead of 7.3. But why run the older release?
DoeveR August 07 2017 Where can I find the write up on running VMS 6.1 using the simh emulator?
Bart March 20 2017 Happy to have found my password again!