This may be nothing. I just installed 4 compilers on FreeAXP off the OpenVMSHobbyist Alpha Kit CD: C++, Basic, Pascal and Fortran. The installs went well.
The only problem was when I installed the CXML extension library to the FORTRAN compiler using "Product Install CXML disk:[directory]".
As the last part of the install, after completing the CXML library installation, the installation tests the CXML.
The following product has been installed:
DEC AXPVMS CXML V5.2-1 Layered Product
PCSI-I-IVPEXECUTE, executing test procedure for DEC AXPVMS CXML V5.20-1...
You see the "emulator units" on the FreeAXP emulator drop from the 120 - 130 range down into the 50's. I expected that since I assume as part of the testing, the processor is crunching test routines. However, after 15 minutes without progress, I controlled/interrupted out of it.
Anyone else seeing the CXML install hang at the test point?
Best Regards,
Patrick
Author
RE: Possible Hang on Instaling Fortran Compiler CXML Extension?
Posts: 134 Location: Hopedale, MA USA Joined: 15.12.05
Posted on December 24 2010 06:15
pnkearns wrote:
Hi,
This may be nothing. I just installed 4 compilers on FreeAXP off the OpenVMSHobbyist Alpha Kit CD: C++, Basic, Pascal and Fortran. The installs went well.
The only problem was when I installed the CXML extension library to the FORTRAN compiler using "Product Install CXML disk:[directory]".
As the last part of the install, after completing the CXML library installation, the installation tests the CXML.
The following product has been installed:
DEC AXPVMS CXML V5.2-1 Layered Product
PCSI-I-IVPEXECUTE, executing test procedure for DEC AXPVMS CXML V5.20-1...
I'm just guessing here, but is it possible to install without testing? It used to be (a long,long time ago) that testing routines were optional, and could be deferred as a separate step. If it is possible to do so, I would suggest de-installing, then re-installing without the test. The installation procedures for most products (used to) tell you how to run the tests, post-install. That way, it would be easier to monitor the process running the test, to see if the process loops or hangs while running. You could even take a crash dump, and if you have a support contract, have HP analyse the dump.
malmberg June 26 2018 https://www.openvmshobbyi st.com/forum/viewthread.p hp?forum_id=10&thread_id= 2363
bhamakripa June 24 2018 I am trying OpenVMS via SIMH. Need to get OS binaries for v7.3. Registered here but don't have any membership number yet which is needed to get license. Pls suggest what to do. I hardly know anyth
basilh June 05 2018 Any other forum members in Perth, Australia?
malmberg March 24 2018 Probably. More people hang out on the comp.os.vms newsgroup.
vaxpert March 23 2018 I have a PE42A and other Alpha system stuff for sale. I'm in So California. Any interest out there?
goodbyespy February 27 2018 To Prohorenko. Please, visit group OpenVMS in the ok.ru
peteherrera February 24 2018 How much does it cost to buy a complete OpenVMS hardcopy documentation set of the latest version
prohorenko February 17 2018 Please help to obtain the license on OpenVMS
malmberg December 12 2017 HPE only makes the most current version of OpenVMS Alpha / IA64 /VAX available to hobbyists. When I had access to the Alliance 1 program it was the same. No public downloads are allowed by HPE.
nmbonao December 08 2017 Is anybody knows OpenVMS 8.2 version downloadable version? or CD copy? Thank you very much
aarommes December 02 2017 Bitcoin and Blockchain enthusiasts ( plus distributed computing ) please connec / reply: http://www.openvmshobbyis t.com/forum/viewthread.ph p?forum_id=130&thread_id= 2991
malmberg September 10 2017 https://sourceforge.net/p /vms-ports/wiki/VMSInstal lation/ For the most part just use VMS 6.1 media instead of 7.3. But why run the older release?
DoeveR August 07 2017 Where can I find the write up on running VMS 6.1 using the simh emulator?
Bart March 20 2017 Happy to have found my password again!
