I have a Alpha 433au that needs a new home as I don't have anywhere to put it any more - I'm open to offers. 17" HP LCD monitor (1280 x 1024) and mouse also available (used boxed) if required, may have a keyboard as well. Buyer collects.
Currently has VMS 8.4 installed but also runs Debian Linux and True-64 Unix.
AXP 433Mhz CPU 2Mb B cache
768MB RAM
4.3GB HDD
Toshiba SCSI CDROM
Floppy disk
PBXGB Graphics Card 2Mb
DE500 Network Card (in addition to onboard 21143)
PBXDA 4 port async card (no cable)
ISP1040 Qlogic SCSI card (in addiion to onboard ISP1040)
I also have the following additional cards.
PBXGI Powerstorm 4D40T PCI Graphics adapter (a monster of a card, requires 2 slots and is only supported by True 64 UNIX).
Simpact DE-000-0820 (no cables)
Buyer collects from SE England RG27 or GU34. Can been seen working at GU34 if required - evening or weekends only.
It is a nice system and I've grown quite fond of it but I don't have the space any more so it must go.
MarkRLV September 17 2021 At one time, didn't this web site have a job board? I would love to use my legacy skills one last time in my career.
malmberg January 18 2021 New Hobbyist PAKs for VAX/VMS are no longer available according to reports. Only commercial licenses are reported to be for sale from HPE
dfilip January 16 2021 Can someone please point me to hobbyist license pak? I'm looking for VAX/VMS 7.1, DECnet Phase IV, and UCX/TCPIP ... have the 7.1 media, need the license paks ... thanks!
malmberg September 05 2020 VSI community non-commercial licenses for AXP/IA64 are available now.
malmberg September 05 2020 See the forum about licensing. Don't know if HPE hobby licenses still being issued. Commercial licenses still being sold.
silfox70 September 01 2020 I need the license for OpenVMS7.3. Where can I find them?
malmberg August 29 2020 Eisner, which is currently being moved, got an SSH update and the keys were updated to more modern encryption standards.
jiml July 11 2020 ssh to eisner is now giving (on linux) "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!" , Has the server key in fact changed ? Of WHO can we ask that somewhere on the eisner webpage they
wyan May 06 2020 Turns out I had an account here, it still was set to my location a decade ago, so hey, I'm back after over a decade!
Hein April 21 2020 Hi all, haven't been here in years. Good to see it is all there still. I'm looking around at the forum to stop/start msipcap - 'could not be stopped' - for now. I'll shutdown FreeA
EstesDave January 09 2020 does anyone have or know of DRB32 manuals
