| Author |
Looking for VGA adapter for Vaxstation 4000/60 |
intensifi
Member
Posts: 1
Joined: 02.03.09 |
| Posted on May 29 2009 13:03 |
|
|
Hello,
I have a Vaxstation 4000/60 with the DEC video adapter. It has three connectors. I currently use a cable to go to a 19" DEC CRT. I'd like to lose the massive CRT and plug it into a flat panel.
Any ideas?
Jeff Adams |
|
|
| Author |
RE: Looking for VGA adapter for Vaxstation 4000/60 |
urbancamo
Member
Posts: 47
Location: Windermere, UK
Joined: 16.05.07 |
| Posted on May 27 2010 22:29 |
|
|
Jeff,
Is your video cable 3W3 to BNC connectors? If so, get a VGA to BNC cable and three male-male BNC adapters, connect it all together and it should work. Most panels support sync-on-green which is a requirement for displaying the output from a VAXstation. I have both iiyama and ag neovo flat panels that work fine. Obviously a 4:3 1280x1024 will work best.
Regards, Mark. |
 |
| Author |
RE: Looking for VGA adapter for Vaxstation 4000/60 |
OliverK
Member
Posts: 25
Location: Germany
Joined: 24.05.10 |
| Posted on March 13 2012 08:12 |
|
|
I just got a VaxSTation 4000/96 from eBay. Without any cables. It seems that I need a 3W3 to VGA cable ?????
Am I right? |
|
|
