And check out part where is says "In addition, the OpenVMS Hobbyist Program offers kits containing OpenVMS Base O/S software and selected Layered Products via download." I know this is something that's been asked about on several occasions, and HP has finally taken it to heart. This should also allow the Hobbyist Program to provide a lot more Layered Products that previously available.
And check out part where is says "In addition, the OpenVMS Hobbyist Program offers kits containing OpenVMS Base O/S software and selected Layered Products via download."
Where exactly is the part that says "In addition..."? I don't see it on the referenced license registration page.
MarkRLVon December 07 2014 15:21
Is the web site OpenVMS.org down or gone?
HobbyistOneon December 07 2014 16:33
It's being relocated to a facility provided by VMS Systems, Inc - the new development home of our favorite O/S. It should be available again soon.
Carduelison April 04 2016 20:33
This still doesn't seem to be available. Is there any news?
babydron April 01 2018 13:10
Hello All , Everyone probably already knows but this is the url for registration ,
https://www.hpe.com/h41268/live/index_e.aspx?qid=16347
I registered 27th or the 28th of Mar 2018 , Haven't even seen a note back from them that I did register . Hopefully this week .
malmberg January 18 2021 New Hobbyist PAKs for VAX/VMS are no longer available according to reports. Only commercial licenses are reported to be for sale from HPE
dfilip January 16 2021 Can someone please point me to hobbyist license pak? I'm looking for VAX/VMS 7.1, DECnet Phase IV, and UCX/TCPIP ... have the 7.1 media, need the license paks ... thanks!
malmberg September 05 2020 VSI community non-commercial licenses for AXP/IA64 are available now.
malmberg September 05 2020 See the forum about licensing. Don't know if HPE hobby licenses still being issued. Commercial licenses still being sold.
silfox70 September 01 2020 I need the license for OpenVMS7.3. Where can I find them?
malmberg August 29 2020 Eisner, which is currently being moved, got an SSH update and the keys were updated to more modern encryption standards.
jiml July 11 2020 ssh to eisner is now giving (on linux) "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!" , Has the server key in fact changed ? Of WHO can we ask that somewhere on the eisner webpage they
wyan May 06 2020 Turns out I had an account here, it still was set to my location a decade ago, so hey, I'm back after over a decade!
Hein April 21 2020 Hi all, haven't been here in years. Good to see it is all there still. I'm looking around at the forum to stop/start msipcap - 'could not be stopped' - for now. I'll shutdown FreeA
EstesDave January 09 2020 does anyone have or know of DRB32 manuals
